Project Type: Garage

Danny had waited patiently while his truck was being restored by another shop. During several visits to see the progress on his truck over the 10 years they had it, Danny became disillusioned with the work being performed. Plans were already made before the truck was done to bring it to Midnight Hot Rods for…

Designed and installed suicide Doors on a nice solid 1962 Caddy.  

Customer had a very solid 47 Dodge 4 door, on which he wanted to install Air Ride. We installed a complete air ride system with a triangulated 4 link system in the rear. We also converted the electrical system from 6 volt to 12 volt.  

Repaired tilt front end, installing gas-charged hood openers. Fabricated and installed stainless steel exhaust cutouts.  Installed a supercharger, replaced the fuel cell.  Replaced all hind joints, all rod ends, etc.

Installed dual master cylinder under the floor, stainless brake lines front to back with proportioning valve. Installed a 5-spd transmission behind the original 6cyl, using the original shifter.  Removed rear leaf springs. Removed the dumpbox hydraulic unit. Installed tube-style shocks on all four corners. Relocated the battery.  Converted the truck from 6 volt to 12…

Gordon, one of our many return customers, purchased this car from an online auction site, and it was not quite as described.  We had a full page of to do things for this car before we had it off of the trailer. We re-did the wiring front to back, installed a transmission cooler, made and…

We received this car from another shop that had no idea how to make it work.  Midnight completely rebuilt the whole car.  Custom transmission adapter plate to mate the Lexus V8 to a GM 700R4 transmission.  Built a custom wiring harness. Fabricated custom valve covers. Redid the dash, hooked in the heater and A/C controls…

Customer bought the car semi-complete and needed updates. We rebuilt the flathead, installed a 5-spd trans and a late-model rear end. Redid the brakes with split master cylinders and a hydraulic clutch. Boxed the frame, installed a drop front axle and soft ride springs. Notched the rear frame to get the stance lower. Dual exhausts…

This rabbit was purchased as a race car ready to race. When the owner Brian got the car home he discovered that the car was not as ready as he thought. The roll cage was not anywhere near useable. So, out with the old and in with the new. The rabbit was completely stripped down…

87 Grand National the customer purchased with a drag racing cage installed. Todd wanted the car to be legal in the NASA American Iron Road Racing Series. When we received the car we removed the old cage. Than we built and installed a road racing cage with Nascar door bars. This cage is mounted through…